TIER 3 stations

This is the list of EV charging station models that are connected to Virta backend and can be used. The assumption is that the model with the listed OCPP Model Name, OCPP Protocol and firmware (FW) or newer version of the FW are compatible, but Virta does not give warranty nor guarantees that the model with new firmware works.

Please note that it is on customer responsibility to have resources and knowhow for commissioning of the device. Furthermore, Virta’s obligation ends when the EV charging station model has been added to the Virta backend.

Should there be problems with the device that requires troubleshooting, the customer must contact the device manufacturer by themselves as Virta does not give hardware (HW) technical support for HW that is not sold by Virta.

We have attached the list as an excel file at the bottom of this article.

Process for Integrating The Station Model Variants of Already Integrated Tier 3 Stations (this list)

An OCPP integration test is not required for the variants of already integrated station models of this Tier 3 list if the model variant uses the same controller AND has the same OCPP keys as the tested model. If one or both requirements are not met, an OCPP integration test is mandatory.

For this reason, the manufacturer can sign the statement letter for the device compatibility/interoperability whenever they wish to integrate a new charger model variant that meets both requirements stated previously (the same controller AND the same OCPP keys as the tested model).

The statement letter should include the company’s official stationery header and/or footer as well as the signature of the company’s representative who issued the letter.

The statement letter from the manufacturer is mandatory since the new model variant of a tested charger model will not be added to our backend without it.